Optical Bases

Large Optical Rails Using radial fins allows for optical-system units to be linearly laid out and configured on four surfaces.

Large Low-profile Optical Rails Directly secured to a test bench or the like due to its slim design, allowing optical-system units to be linearly laid out and configured with a low optical axis.

Medium Optical Rails Using fins with an X-shaped cross section allows optical-system units to be linearly laid out and configured on four surfaces so that they are compact.

Medium Low-profile Optical Rails Directly secured to a test bench or the like due to its small and slim design, allowing optical-system units to be linearly laid out and configured with a low optical axis.

Carriers for Large Optical Rails Attached to a large aluminum optical bench to be slid and secured at an arbitrary position.

Carriers for Medium Optical Rails Attached to a small aluminum optical bench to be slid and secured at an arbitrary position.

Rail Feet Attached to a large aluminum optical bench for horizontal adjustment of the bench.

Feet for Large Optical Rails Attached under an aluminum optical bench for horizontal adjustment of the bench.

Magnetic Bases Can be magnetically secured on top of an optical vibration isolator or the like.

Fexible Claws Have a holding section that can be flexibly moved for securing at an arbitrary position.

Base Plates Designed to be secured on top of a vibration isolator or the like with M6 bolts used to lay out and secure optical units.

Base Clamps Can secure a system or equipment with a plate-shaped protrusion on its bottom surface.

Kinematic Bases Made up of two plates, one upper and one lower, and designed to secure equipment on its upper plate. The upper plate can be attached/detached in accordance with changes in the optical axis or other conditions.

Adjustable Spacer Kits Spacers used to adjust the height of a unit or the like in the configuration of an optical system.

Platforms Plates with M4 tapped holes arranged in a matrix form. Directly secured on top of a vibration isolator using M6 bolts.

Platforms for Labjack Can be used as a simplified type of base plate. Designed for optical-system units secured using M4 screws.

SIGMA KOKI CO.,LTD.
Tokyo Head office
5F, SIGMA KOKI Tokyo Head office 1-19-9, Midori, Sumida-ku, Tokyo, 130-0021, JAPAN
TEL.+81-3-5638-8228 FAX.+81-3-5638-6550 international@sigma-koki.com
Osaka Branch
4-9-28 Nishi-Nakajima, Yodogawa-ku, Osaka 532-0011, JAPAN
TEL.+81-6-6307-4835 FAX.+81-6-6307-4834
Kyushu Sales Office
3-17 Hie-machi, Hakata-ku, Fukuoka 812-0014, JAPAN
TEL. +81-92-481-4300 FAX. +81-92-481-4310