Holders - Mirror Holders
Redesigned the adjustment screw from the side to vertical. It can downsize operating space around the mount.
To provide maximum clear aperture of transmitted beam at 45 degrees incidence, the design of mirror case got improved.
High stability Kinematic Mirror Holder (MHG) with new locking mechanism as （NOMI LOCKTM
Offers compact dimensions and high stability, with a mirror held and secured at three points. Suitable for use at points closer to devices and at an incident angle of 45°
Use when optical elements with smaller diameters than those of compatible elements are mounted on holders.
Plates for adapting posts.
Plates are connected directly by knob screw to a vibration isolator, optical experiment system with M6 tap.
Adapter for 45° incident angle mirrors.
Holds a compact mirror with adhesive or a special mirror-case adapter. Smaller, light-weight holder.
Mirror case adapter designed specifically for smaller kinematic mirror holders (MMHN series). Facilitates exchanging optical elements.
Mirror holders allowing fine adjustment of elevation and direction of rotation with respect to a support reference point.
One-touch mirror holder to which a mirror can be easily attached/removed without tools.
Component for adjusting the height of the optical axis and optical path; mounted directly on a vibration isolator or the like with screws.
Holder unit for adjusting the height and optical path; connected to a ø20-mm pole (optional).
Ideal for use mounted on a device; resists loosening and offers superior positional stability.
The operating unit is mounted on a plane perpendicular to the optical axis, eliminating interference between devices or between the optical axis and hands during adjustment.
Plates for use mounted on the bottom surface or either side surface of kinematic top-operating mirror holders.
Permits adjustments without changing the optical axis (center of the mirror reflective plane is anchored by the intersection of the elevation axis and the rotation axis).
Holder with a larger clear aperture for reflection and transmission. A thin frame and gimbal mirror holder ensure no shading.
A mirror holder whose center of rotation is made to coincide with the mirror center by a gimbal mechanism.
Compact Vertical Control Gimbaled Mirror and Beamsplitter Holoders which is suitable for built-in application.
The operating unit is placed above, eliminating interference between devices or between the optical axis and hands during adjustment.
Five types of mirror holders are available, ranging from ø100 to 300 mm.
Holders permit work close to other devices.
Used to mount an optical element having smaller diameters than compatible elements for ø30 or ø50 mm holders.
Flip up type mirror holder mount for swithing optical path.