Mirrors
Low Dispersion Mirrors for High Power Femtosecond Laser
The Low Dispersion mirror is designed for lasers with femto-second order pulse widths.
Low Dispersion Mirrors for Femtosecond Laser
The Femto Low Dispersion mirror is designed for lasers with femtosecond pulse widths.
Negative Dispersion Mirrors for Femtosecond Laser
This mirror has a negative dispersion and can be used for pulse compression in a femtosecond laser system.
Dielectric Mirrors For High Power Laser
All dielectric designs are much more resistant to laser damage than typical mirrors and are suitable for use with high power laser systems.
Ultra Broadband Dielectric Mirrors
Visible, near infrared and other multiple wavelengths are covered with single mirror
Laser Line Mirrors
Allow a high reflectance of 99% or more, since the coating absorbs no light, depending on the incident angle.
0-45° Wide Incidence Dielectric Mirrors
Allow high reflectance of 99% or more, since the coating absorbs no light; may be used at an incident angle of 0° to 45°
Harmonic Separators
Mirrors for splitting the fundamental wave and the harmonic waves in YAG laser.
Custom-made Total-reflection Flat Mirrors
Also available are total-reflection mirrors made to specific dimensions, shapes, wavelengths, and other parameters.
Flat Mirrors for Scanners
Total-reflection flat mirrors for use in scanning; made to specifications as custom products.
Gold Flat Mirrors
Total reflection mirrors coated with gold (Au) that has high reflectance in a wide range of infrared.
Laser Cavity Mirrors
Laser resonant mirrors with dielectric film coated upon concave substrate or precision parallel plates are available upon request. These laser cavity mirrors can be made to specifications.
UV Enhanced Aluminum Flat Mirrors
Aluminum mirrors produced by over-coating several layers of dielectric films, enhancing reflection at UV range (200-300nm) and also protect from scratches and Aluminum surface deterioration.
Surface Accuracy Guaranteed Mirror
Coat by dielectric multilayer high reflection on the fused silica substrate and the surface accuracyλ/10 after coating is guaranteed.
Holder Attached Surface Accuracy Guaranteed Mirrors
A λ/10 surface accuracy guarantee mirror by bonding the coated surface accuracy guaranteed mirror to Kinematic Mirror Holders.
Aluminum Mirrors
These products have high reflectance in wide range from visible to infrared and scarcely depend on incident angles.
High Parallelism Aluminum Mirrors
These mirrors are used as reference mirrors on the surfaces of low reflectance flats (such as surface plates or breadboards).
Enhanced-aluminum Reflection Flat Mirrors
Mirror reflectance increased by about 5% by over-coating several layers of dielectric films on an Al coating.
Aluminum Flat Mirrors for Ultraviolet Light
Mirrors in which the thickness of MgF2 films over-coating on an Al coating is adjusted to match light in the ultraviolet region.
Aluminum Concave Mirrors
It is used to focus input beam in the direction of reflection. These products have high reflectance in wide range from visible to infrared and scarcely depend on incident angles.
Frameless Mirror Unit / Frameless Beamsplitter Unit
Frameless mounting design minimized footprint and allows the entire front surface of the mirror to be coated.
Custom Aluminum Concave or Convex Mirrors
Also available are total reflection spherical concave or convex mirrors made to specific dimensions, shapes, curvatures, and other parameters.
Spherical Concave or Convex Mirrors
Also available are cylinder concave or convex mirrors made to specific dimensions, shapes, curvatures, and other parameters.