Holders
Vertical Control Gimballed Mirror and Beamsplitter Mounts
Redesigned the adjustment screw from the side to vertical. It can downsize operating space around the mount.
NOMI LOKTM Model Kinematic Mirror Holder
High stability Kinematic Mirror Holder (MHG) with new locking mechanism as （NOMI LOCKTM
Gimballed Beamsplitter Mounts
To provide maximum clear aperture of transmitted beam at 45 degrees incidence, the design of mirror case got improved.
Kinematic Mirror Holders
Offers compact dimensions and high stability, with a mirror held and secured at three points. Suitable for use at points closer to devices and at an incident angle of 45°
Adapter Mounts for Kinematic Mirror Holders
Use when optical elements with smaller diameters than those of compatible elements are mounted on holders.
Plates for Kinematic Mirror Holders
Plates for adapting posts.
Base Plates for Kinematic Mirror Holders
Plates are connected directly by knob screw to a vibration isolator, optical experiment system with M6 tap.
45° Optics Adapters for Kinematic Mirror Holders
Adapter for 45° incident angle mirrors.
Kinematic Small Mirror Holders
Holds a compact mirror with adhesive or a special mirror-case adapter. Smaller, light-weight holder.
Mirror Case Adapters
Mirror case adapter designed specifically for smaller kinematic mirror holders (MMHN series). Facilitates exchanging optical elements.
Vertical Control Small Mirror Holders
Mirror holders allowing fine adjustment of elevation and direction of rotation with respect to a support reference point.
Onetouch Kinematic Mirror Holders
One-touch mirror holder to which a mirror can be easily attached/removed without tools.
Precision Beam Steering Assembly
Component for adjusting the height of the optical axis and optical path; mounted directly on a vibration isolator or the like with screws.
Beam-Steeres
Holder unit for adjusting the height and optical path; connected to a ø20-mm pole (optional).
Flexure Mirror Holders
Ideal for use mounted on a device; resists loosening and offers superior positional stability.
Topmike Vertical Control Mirror Holders
The operating unit is mounted on a plane perpendicular to the optical axis, eliminating interference between devices or between the optical axis and hands during adjustment.
Plates for Topmike Mirror Holder
Plates for use mounted on the bottom surface or either side surface of kinematic top-operating mirror holders.
Gimbal Mirror Holders
Permits adjustments without changing the optical axis (center of the mirror reflective plane is anchored by the intersection of the elevation axis and the rotation axis).
Gimbal Beamsplitter Holders
Holder with a larger clear aperture for reflection and transmission. A thin frame and gimbal mirror holder ensure no shading.
Gimbal Beamsplitter Holders
A mirror holder whose center of rotation is made to coincide with the mirror center by a gimbal mechanism.
Vertical Control Gimballed Mirror and Beamsplitter Holders
Compact Vertical Control Gimbaled Mirror and Beamsplitter Holoders which is suitable for built-in application.
Vertical Control Gimbal Mirror Holders
The operating unit is placed above, eliminating interference between devices or between the optical axis and hands during adjustment.
Larger Precision Gimbal Mirror Holders
Five types of mirror holders are available, ranging from ø100 to 300 mm.
Close-proximity Mirror Holders
Holders permit work close to other devices.
Adapter Mounts
Used to mount an optical element having smaller diameters than compatible elements for ø30 or ø50 mm holders.
Optical Path Switching Mounts
Flip up type mirror holder mount for swithing optical path.
Fixed lens holder （Compact type）
Fixable lenses range from thin lens to thick achromatic lens Optimal for optical system that folded back beam passes closely by lens holder or holders themselves are located close together.
Three-axis Optics Holders
Holder for centering a lens - a mandatory task for optical adjustment . Allows adjustment in the vertical, horizontal and focusing directions.
Five-axis Optics Holders
Holder for centering a lens - a mandatory task for optical adjustment . Allows adjustment in the vertical, horizontal, focusing, tilt, and rotation directions.
Fixed Lens Hoders
To hold an optic, fit the resin Delrin ring for optic protection and the retaining-screw ring into the holder, in that order, and then secure using the screw ring.
Fixed Focusing Lens Hoders
Fixed Lens Holders for our focusing lens with protective case.
Two-axis Lens Holders
Holder for centering a lens - a mandatory task for optical adjustment . Compact and allows adjustment in the vertical and horizontal directions. Best suited for applications requiring incorporation into equipment.
Caliper Variable Lens Holders
Accepts a lens of an arbitrary diameter, and ensures that each held lens is constantly kept coaxial.
Adjustable Round Lens Holders
Accepts a lens of an arbitrary diameter. Holds an optic by adjusting the side sliding sections to fit to the optic size and securing the optic using the top clamp screws.
Small Lens Claw
Holder for holding a circular small-diameter lens or mirror. Accepts a 5- to 10-mm-diameter optic.
Selfoc® Lens Claws
Holder for holding a SELFOC ® lens (1.5 to 3 mm in dia.) or a cylindrical optic.
Adjustable Cylindrical Lens Holders
Holder for holding a cylindrical lens. Accepts a lens of an arbitrary size.
Adjustable Cylindrical Lens Holders - Thick Edge Type
Holder that is for holding a cylindrical lens and has a flexibly movable holding section. Particularly well suited to holding a lens with thick edges.
Objective Holders
Holders specially designed to hold an objective lens.
Prism Tables
Holders designed to secure a right-angle prism or a cube-type beam splitter of an arbitrary size.
Prism Adapter for Kinematic Mirror Holder
A prism adapter used in attaching kinematic mirror holder.
Corner Cube Prism Holders
Holder specially designed to secure a corner cube prism. Secures the prism from three directions using its jaws (black b akelite).
Dove Prism Holders
Dove-prism-mounted and optically adjusted holder capable of coarse 360 E rotation within the plane vertical to the optical axis.
λ/2 Frenel Rhomb Waveplate Holders
Incorporates a λ/2 Fresnel-rhomb wavelength plate and is capable of 360° coarse rotation within the plane perpendicular to the optical axis.
λ/4 Frenel Rhomb Waveplate Holders
Incorporates a λ/4 Fresnel-rhomb wavelength plate and is capable of 360° coarse rotation within the plane perpendicular to the optical axis.
Polarizer Holders - MICROR Series -
Holder for rotating diameter polarizeing plate, waveplate, or the like in a certain plane.
Polarizer Holders
Holders for rotating a wavelength plate, polarizing plate, or the like within a specific plane, capable of 360° coarse rotation within the plane perpendicular to the optical axis.
Precision Polarizing Holders
Holders for rotating a wavelength plate, polarizing plate, or the like within a specific plane, capable of 360° coarse rotation within the plane perpendicular to the optical axis, with } 5° fine adjustment available.
Polarizing Prism Holders
Holder for rotating a polarization prism or the like 20 to 23 mm in diameter within a specific plane, capable of 360° coarse rotation within the plane perpendicular to the optical axis.
Precision Polarizing Prism Holders
Holder for rotating a polarization prism or the like 20 to 23 mm in diameter within a specific plane, capable of 360° coarse rotation within the plane perpendicular to the optical axis, with } 5° fine adjustment available.
Variable ND Filter Holder Wheels
Designed for use as an attenuator to continuously change the transmitted laser-beam intensity.
Filter Wheels
Accommodate multiple ND filters with different transmittances for use as an attenuator. Applicable optics: ø15, 25.4 mm in dia.
Filter Holders - MICROR Series -
Holders for holdinground filters.
Filter Holders
Holders for holding multiple round filters. Applicable optics: ø20, 25, 50 mm in dia.
Filter Holder Adapter
Adapter specially designed to attach optics to the filter holders without damage.
Filter Holder - CS Type
Holders for holding rectangular or round filters or optics. Applicable optics: ø25, 50 mm in dia., 25 x 25 mm, 50 x 50 mm
Laser Holders (with Damped Post)
Holder capable of holding a circular laser of an arbitrary size from 25.4 to 44.5 mm in diameter. Directly screwed onto a vibration isolator or the like. The holder section allows coarse adjustment of the height.
Adjustable Laser Holders (with Damped Post)
Holder capable of holding a circular laser of an arbitrary size from 25.4 to 44.5 mm in diameter. Directly screwed onto a vibration isolator or the like. The holder section allows fine adjustment of the horizontal and vertical axes.
He Ne Laser Holdes
Holder for holding a circular laser. Two types are available: one that holds the laser at two positions using three locking screws each, and one that holds the laser using an adapter built into the main body of the kinematic mirror holder.
Diode Laser Holders
A holder intended for use only with Diode lasers (visible).
Diode Lasers
Sets include Diode laser (visible) and dedicated holder.
Laser Beam Expander Holders with Diopter Correction Function
Holders allowing fine adjustment, consisting of a kinematic mirror holder and a laser beam expander (with diopter correction function).
Laser Beam Expander Holders
Holders allowing fine adjustment, consisting of a kinematic mirror holder and a laser beam expander.
Laser Beam Expander Adapter
An adapter specially designed to attach a laser beam expander to a five-axis optics holder (ALH-50-5RO) that has a lens centering function.
Spatial Filter Holders
Holders for providing a clear wavefront by removing wavefront noise and distortion from the laser beam using an objective lens and a precision pinhole.
Two-axis Pinholes / Objective Holders
Holders allowing vertical and horizontal fine motion of a pinhole, fixed slit, objective lens, and others within the plane perpendicular to the optical axis.
Pinhole Holders
Holders allowing vertical and horizontal fine motion of a pinhole within the plane perpendicular to the optical axis.
Precision Pinholes
The pinhole is an optical component required for spatial filters, diffraction technology, image-forming systems, and others.
Precision Pinholes for High Energy Laser
Pinhole for high-energy laser of an optical component required for spatial filters, diffraction technology, image-forming systems, and others.
Iris Diaphragm
Holders for incorporation into other equipment, used to change the laser-beam diameter and for the pupil in an optical system.
Iris Diaphragm Holders
Holders used to change the laser-beam diameter and for the pupil in an optical system.
Adjustable Iris Diaphragms
Holders used to change the laser-beam diameter and for the pupil in an optical system. Adjustment mechanisms available for the X- and Z-axes.
Iris Diaphragm Holders - ID type
Holders used to change the laser-beam diameter and for the pupil in an optical system. Can be incorporated into other equipment with two locking holes.
XY Slits for X Ray
Holder for shaping X-rays and laser beams. The blades are independent from each other, allowing the blades to be independently opened / closed horizontally and vertically.
Adjustable XY Slits
Holders for shaping the laser beam. One micrometer head can simultaneously open/close two blades horizontally. The height is adjusted by the Hartmann method.
Precision Air Slit
Fixed slit with an accurate width and high parallelism will be needed for an optical component required for beam alignment and mapping.
Shutter System
System capable of controlling up to four axes using a free combination of release or solenoid shutters. The system is available control by PC.
Shutter Holders
The holder used to open/close the laser-beam optical path. Can be remotely controlled using a 150-mm release. It also have a 500mm cable release.
Sample Holders
Holders designed to adjust the tilt of a sample or the like, with the tilt adjustable in two directions.
XZ Mechanical Stage
Mechanical stage for a microscope, combined with rack-and-pinion stages with dovetail-grooved guides, capable of fine motion in the vertical and horizontal directions.
SquareOptics Holders
Holders for holding a rectangular mirror, filter, chart, or the like.
Grating Holders
Holder specially designed for gratings (diffraction gratings).
Test Target Holders
Holder having 0.5-mm-diameter stainless steel pins for optical-axis observation that intersect at right angles within a movable ring; designed for optical-axis adjustment and observation.
Beam Diffusers
Holder for diffusing a laser beam. Designed to diffuse a laser beam within a diffuser to prevent possible damage.
Camera Holders
Holder for holding a camera. Can be tilted and rotated for clamping at an arbitrary position.
Dry Plate Holders
Holder for holding a slim sample, dry plate, or the like.
Flare Plates
Used for observation of interference fringes produced by an interferometer, for alignment or other purposes.
Fiber Optics Holders
Holder for mounting and adjusting an optical fiber using a dedicated adapter.
Adapters for Fiber Optics
Adapter specially designed for optical-fiber holders.
FC Type Fiber Optics Holders
Holder for mounting and adjusting an FC-type optical fiber. Comes standard with an FC connector and receptacle.
Connectors for FC Type Fiber Optics / Adapters for Ferrule
Adapter supplied with an FC-type optical fiber, rotary fine-motion optical fiber, and laser-focusing holders.
Mini-Fiber Optics Holders
Used to mount the core or clad section of the fiber to the V-groove at the front end of the holder and the jacket section to the V-groove at the rear. The optical fiber is secured using a magnet.
Adapters for Mini-Fiber Optics
Adapters specially designed for small optical-fiber holders.
Precision Mini-Fiber Optics Holders
Holder combining the FC-type optical-fiber fine-motion holder with the small optical-fiber holder.
Precision Fiber Optics Holders-Rotatiaon Type
Holder primarily designed to mount and adjust a polarization-preserving FC-type optical fiber. Comes standard with an FC connector and receptacle.
Laser Focusing Holder
Holder for guiding the laser beam to an FC-type optical fiber. Comes standard with an FC connector and receptacle.