Brackets and Adapter Plates
Z Angle Brackets
Bracket allowing use of X-axis stage as Z-axis stage by making the X-axis stage stand vertically.
L Angle Brackets
Bracket to be attached to the vertical face of a stage. Accessories and other equipment can be connected thereon.
50 x 50mm Adapter Plates
Mounting hole-converting spacer for stages.
Top Plates for KSP / KSPA
Mounting hole-converting spacer for θ-axis coarse/fine control stages (KSP and KSPA).
Bottom Plates for KSP-786M
Mounting hole-converting spacer for θ-axis coarse/fine control stages (KSP-786M).
Top Plates for MB-CB-PB
Mounting hole-converting spacer for magnet bases (MB, CB, and PB).
Top Plates for HCS-L
Mounting hole-converting spacer for helicoid stand (HCS-L).
Top Plates for TAR
Mounting hole-converting spacer for rack and pinion stage .
32 x 32mm / M16 Adapter Plates
M16-converting spacer for 40 x 40mm stages.
32 x 32mm Adapter Plates
A spacer to secure stages having 50 x 50mm pitch or ø50mm M4 mounting holes on a stage of 32 x 32mm in dimension having M3 taps.
Bottom Plates for KSPA 806M, 1006M
Mounting hole-converting spacer for θ axis coarse/fine control stages (KSPA-806M and 1006MH).
M16 P1 Adapter Plates
Mounting hole-converting spacer for M4 ø50 rotation stages and other equipment.
M16 P1 / M16 P2 Adapter Nuts
Pitch-converting spacer for post systems.
M16 P1 / M6 P1 Adapter Nuts
Mounting adaptor for post systems.
M16 P1 / M6 P1 Adapter Nuts
Mounting adaptor for post systems.
M16P1 Adapter Plates
Spacer to secure and install a holder having M6 P1 screw holes from below.
Top Plates for KSP-406M
Mounting hole-converting spacer for a θ-axis coarse/fine control stage (KSP-406M).
Top Plate Spacers for TAS-2060
Mounting hole-converting spacer for leadscrew stages (TAS-20601 and 20602).
Adapter Nuts
Adapter Nut that is for changing the holder's M6 tapped rod-mounting hole to an M4 hole.