| Part Number |
SGEMCS |
SGTERM |
SGLCES |
Use of
USB Key |
 |
|
|
| The purpose and a use |
SGEMCS is a software which can communicate with devices such as Sigma Koki's automatic positioning device, measuring instruments or control devices to collect data and conduct measurement. |
Multi-purpose communication terminal software based on Microsoft Excel.
It is the software for performing control of device, data collection from a measuring instrument, etc. from on Excel. |
SGLCES is a software which can communicate with Sigma Koki's automatic positioning device, luminance meters, etc. and configure a liquid crystal evaluation system easily. |
| Function |
•Compatible with various measurement modes, including manual measurement, time-series measurement, and specified number of measurements.
•By the instruction file created on the Excel sheet, control of a stage and measurement with a measuring instrument are performed.
•Measurements are accumulated in Excel sheets.
* Only the measuring instrument whose transmission and reception are 1 to 1 can be used.
* The binary data communication is impossible. |
•Allows measurement and control based on a list of commands in an Excel sheet.
•Facilitates operations control using SGTERM-based control scripts in the Excel sheet.
•Measurements are accumulated in Excel sheets.
•The binary data communication in RS232C also became possible. |
•Equivalent to the higher rank software of SGEMCS.
&bu addition to the function of SGEMCS, the binary data communication in RS232C is also possible.
&buMa devices, such as a luminance meter, a spectrum radiometer, etc. used by liquid crystal evaluation can be used.
&buAccordi to a request of a customer, it can respond to customize or creation of a sample. Please consult about contents and expense. |
| Price (JPYen) |
50,000 |
30,000 |
200,000 (Basic price)
*In upgrade from SGEMCS, a price is 25%OFF. |
| Download |
Download |
Download |
|
|
| Part Number |
SGACTX / SGSFSX /
SGPATX |
SGNETX |
SGMACS |
Use of
USB Key |
 |
|
|
| The purpose and a use |
Software permitting easier control programming for automatic positioning and orientation-control devices and measuring equipment, with Excel macro or Visual Basic. |
Software permitting easier control programming by Visual Basic .NET for automatic positioning and orientation-control devices and measuring equipment. |
The highly efficient version software which added analysis / correction function to Sigma Koki's measurement / control software SGEMCS. It also extended the method of Excel instructions further and enabled impossible control in SGEMCS. |
| Function |
•ActiveX controls to simplify programming in Visual Basic or Excel macro.
(It corresponds by VisualBasic6.0.) |
•Component software controls to simplify programming in Visual Basic .NET.
(You cannot use it in Excel macro.)
•It corresponds to SHOT series, FINE series, and PAT-001 controller. |
•Equivalent to the higher rank software of SGEMCS.
•The device to be used can be set up more flexibly.
•In addition to the function of SGEMCS, the display of a graph is possible to Excel on real time at the time of measurement.
•The measurement and collection data which were saved at the Excel file are analyzed, and the display of a graph is possible.
•The binary data communication in RS232C is also possible. |
| Price (JPYen) |
For each 7,800 |
12,500 |
100,000
*In upgrade from SGEMCS, a price is 25%OFF. |
| Download |
--- |
--- |
--- |
|
| Part Number |
SGCAMS |
|
|
Use of
USB Key |
|
|
|
| The purpose and a use |
Software that automatically measure and analyze the laser beam divergence |
|
|
| Function |
•Real time and quantitative measurement of beam divergence is possible, utilizing "Beam Collimation Checker System (SPV-05-CS4)".
•Four different output "Fringe rotation", "Radius of wavefront curvature", "Beam divergence" and "Power" is available. Result of OK/NG judgment is displayed for each selected output. |
|
|
| Price (JPYen) |
98,000 |
|
|
| Download |
--- |
|
|